pages

Categories

Diamond Tools

 

Refine Search

Sort By:

Aero GT (P10) Laser Welded Diamond Blade 115mm Diam

£20.00
Premium P10 (AERO GT) Laser Welded Diamond Blade Suitable for Granite, hard and reinforced concrete. Some benefits: * Noise reduction * Transparent when in operation * Vibration damped * Excellent cutting capacity * Self-cooling when dry cutting. Suitable for the following materials: Bricks - Dense Engineering Bricks - Clay Paviours Concrete - Flint Aggregate Concrete Linte..

Aero GT (P10) Laser Welded Diamond Blade 125mm Diam

£24.00
Aero GT (P10) Laser Welded Diamond Blade 125mm DiamPremium P10 (AERO GT) Laser Welded Diamond Blade Suitable for Granite, hard and reinforced concrete. Some benefits: * Noise reduction * Transparent when in operation * Vibration damped * Excellent cutting capacity * Self-cooling when dry cutting. Suitable for the following materials: Bricks - Dense Engineering Bricks - Clay Paviours ..

Aero GT (P10) Laser Welded Diamond Blade 180mm Diam

£30.00
Aero GT (P10) Laser Welded Diamond Blade 180mm Diam  Premium P10 (AERO GT) Laser Welded Diamond Blade Suitable for Granite, hard and reinforced concrete. Some benefits: * Noise reduction * Transparent when in operation * Vibration damped * Excellent cutting capacity * Self-cooling when dry cutting. Suitable for the following materials: Bricks - Dense Engineering Bricks - Cl..

Aero GT (P10) Laser Welded Diamond Blade 230mm Diam

£40.00
Premium P10 (AERO GT) Laser Welded Diamond Blade Suitable for Granite, hard and reinforced concrete. Some benefits: * Noise reduction * Transparent when in operation * Vibration damped * Excellent cutting capacity * Self-cooling when dry cutting. Suitable for the following materials: Bricks - Dense Engineering Bricks - Clay Paviours Concrete - Flint Aggregate Concrete Linte..

Aero GT (P10) Laser Welded Diamond Blade 300mm Diam

£55.00
Premium P10 (AERO GT) 300mm Diam' Laser Welded Diamond Blade Suitable for Granite, hard and reinforced concrete. Some benefits: * Noise reduction * Transparent when in operation * Vibration damped * Excellent cutting capacity * Self-cooling when dry cutting. Suitable for the following materials: Bricks - Dense Engineering Bricks - Clay Paviours Concrete - Flint Aggregate Co..

Aero GT (P10) Laser Welded Diamond Blade 350mm Diam 20mm Bore

£75.00
Aero GT (P10) Laser Welded Diamond Blade 350mm Diam 20mm Bore Premium P10 (AERO GT) Laser Welded Diamond Blade Suitable for Granite, hard and reinforced concrete. Some benefits: * Noise reduction * Transparent when in operation * Vibration damped * Excellent cutting capacity * Self-cooling when dry cutting. Suitable for the following materials: Bricks - Dense Engineering Bricks ..

Aero GT (P10) Laser Welded Diamond Blade 350mm Diam 25.4mm Bore

£75.00
Aero GT (P10) Laser Welded Diamond Blade 350mm Diam x 25.4mm Bore Premium P10 (AERO GT) Laser Welded Diamond Blade Suitable for Granite, hard and reinforced concrete. Some benefits: * Noise reduction * Transparent when in operation * Vibration damped * Excellent cutting capacity * Self-cooling when dry cutting. Suitable for the following materials: Bricks - Dense Engineering Bri..

Aero GT (P10) Laser Welded Diamond Blade 400mm Diam 25.4mm Bore

£140.00
Aero GT (P10) Laser Welded Diamond Blade 350mm x Diam 25.4mm Bore Premium P10 (AERO GT) Laser Welded Diamond Blade Suitable for Granite, hard and reinforced concrete. Some benefits: * Noise reduction * Transparent when in operation * Vibration damped * Excellent cutting capacity * Self-cooling when dry cutting. Suitable for the following materials: Bricks - Dense Engineering Bri..

Aero GT (P10) Laser Welded Diamond Blade 450mm Diam 25.4mm Bore

£188.00
Aero GT (P10) Laser Welded Diamond Blade 450mm x Diam 25.4mm Bore Premium P10 (AERO GT) Laser Welded Diamond Blade Suitable for Granite, hard and reinforced concrete. Some benefits: * Noise reduction * Transparent when in operation * Vibration damped * Excellent cutting capacity * Self-cooling when dry cutting. Suitable for the following materials: Bricks - Dense Engineering Bri..

Diamond Floor Grinding Plates 250mm x 10 Segments

£161.70
High concentration 250mm diameter diamond grinding heads for all types of diamond grinding machines.  Applications Removal of wet dry adhesives Removal of contaminated surfaces Accurate grinding of large concrete areas Smoothing and polishing concrete floors Re-proofing of old concrete floors Smoothing and polishing terrazzo surfaces Removal of old coatin..

Diamond Floor Grinding Plates 250mm x 16 Segments

£207.90
High concentration 250mm diameter diamond grinding heads for all types of diamond grinding machines.  Applications Removal of wet dry adhesives Removal of contaminated surfaces Accurate grinding of large concrete areas Smoothing and polishing concrete floors Re-proofing of old concrete floors Smoothing and polishing terrazzo surfaces Removal of old coatin..

Diamond Floor Grinding Plates 250mm x 20 Segments

£254.10
High concentration 250mm diameter diamond grinding heads for all types of diamond grinding machines.  Applications Removal of wet dry adhesives Removal of contaminated surfaces Accurate grinding of large concrete areas Smoothing and polishing concrete floors Re-proofing of old concrete floors Smoothing and polishing terrazzo surfaces Removal of old coatin..

Double Row Diamond Cup Grinding Wheels

£38.00
Diamond cup wheels are highly abrasive resistant and good for quick smooth and free grinding. Suitable for grinding and polishing: Marble Granite Natural & Artificial Surfaces Concrete Double Row Cup Wheel Use For A Longer Life And Smoother Finish..

Flush Cut T Segment Diamond Blade 125mm Diam (P30)

£39.00
Wet & Dry Use. Various bonds available: 10 | 15 | 25 Depth of cut 230mm diameter is 65mm, with flush cut blade 230mm diameter is 95mm. Petrol saw with 300mm diameter blade cut only 100mm deep. Can be used on some cutting and grinding applications. Prices include flush cut flange. Wet & Dry Use: Various bonds available: 10 | 15 | 25 Depth of cut 230mm diameter is 65mm, with flush c..

Flush Cut T Segment Diamond Blade 230mm Diam (P30)

£55.00
Wet & Dry Use. Various bonds available: 10 | 15 | 25 Depth of cut 230mm diameter is 65mm, with flush cut blade 230mm diameter is 95mm. Petrol saw with 300mm diameter blade cut only 100mm deep. Can be used on some cutting and grinding applications. Prices include flush cut flange. Wet & Dry Use: Various bonds available: 10 | 15 | 25 Depth of cut 230mm diameter is 65mm, with flush c..

Flush Cut Tear Drop Segment Diamond Blade 125mm Diam

£39.00
Wet & Dry Use. Various bonds available: 10 | 15 | 25 Depth of cut 230mm diameter is 65mm, with flush cut blade 230mm diameter is 95mm. Petrol saw with 300mm diameter blade cut only 100mm deep. Can be used on some cutting and grinding applications. Prices include flush cut flange.  ..

Flush Cut Tear Drop Segment Diamond Blade 230mm Diam

£55.00
Wet & Dry Use. Various bonds available: 10 | 15 | 25 Depth of cut 230mm diameter is 65mm, with flush cut blade 230mm diameter is 95mm. Petrol saw with 300mm diameter blade cut only 100mm deep. Can be used on some cutting and grinding applications. Prices include flush cut flange.  ..

Multi Blade Laser Welded Diamond Blade for Sandstone & Abrasive Products 230mm Diam

£40.00
These blades are for Sandstone medium to hard abrasive asphalt and some concrete products. They all have under cut protectors. Do not exceed 17HP. Wet & Dry use. Suitable for the following materials: Asphalt - Hard Over Concrete Asphalt - Road Carriage, Hot Rolled Concrete - Green, Medium Concrete Block - Lightweight Concrete Blocks - Medium 7 Newton Concrete S..

Multi Blade Laser Welded Diamond Blade for Sandstone & Abrasive Products 300mm Diam

£55.00
These blades are for Sandstone medium to hard abrasive asphalt and some concrete products. They all have under cut protectors. Do not exceed 17HP. Wet & Dry use. Suitable for the following materials: Asphalt - Hard Over Concrete Asphalt - Road Carriage, Hot Rolled Concrete - Green, Medium Concrete Block - Lightweight Concrete Blocks - Medium 7 Newton Concrete S..

P15 Tornado Laser Welded Diamond Blade 350mm x 25.4mm Bore

£75.00
PREMIUM P15 (TORNADO) Some benefits: * Noise reduction * Transparent when in operation * Vibration damped * Excellent cutting capacity * Self-cooling when dry cutting. Suitable for the following materials: Bricks - Semi Engineering Bricks - Smooth Faced Concrete - Sea Wash Aggregate Concrete Hard Pressed Slabs Taglas (for the blind) Concrete Hard Pressed Slabs & Ke..

P15 Tornado Ringsaw Laser Welded Diamond Blade

£85.00
PREMIUM P15 (Tornado) Ringsaw Laser Welded Diamond Blade. Some benefits: * Noise reduction * * Vibration damped * Excellent cutting capacity * Self-cooling when dry cutting. Suitable for the following materials: Bricks - Semi Engineering Bricks - Smooth Faced Concrete - Sea Wash Aggregate Concrete Hard Pressed Slabs Taglas (for the blind) Concrete Hard Pressed Slabs &a..

P30 Laser Welded Diamond Blade for Medium - Soft Abrasive Asphalt 230mm Diam

£40.00
  These blades are for soft to medium abrasive asphalt and very abrasive concrete products. They all have under cut protectors. Do not exceed 17HP. Wet & Dry use. Suitable for the following materials: Asphalt - Road Carriage Asphalt - Salt Asphalt - Footpaths Concrete - Green, Medium/Soft Aggregates Concrete Block - Lightweight Concrete Blocks - Lignac..

Radial Bullet Laser Welded Ringsaw Blade

£85.00
All diamond tool manufacturers will tell you that if you use vast amounts of the very best diamond and metal powders in the segment manufacturing to produce core drill bits and blades, they just will not work, but by using the radial system to cut down the surface area contact in segments the impossible becomes a reality with outstanding results, 30% to 60% higher penertration and in some cases 30..

Samurai Diamond Cup Grinding Wheel

£47.00
Diamond cup wheels are highly abrasive resistant and good for quick smooth and free grinding. Suitable for grinding and polishing: Marble Granite Natural & Artificial Surfaces Concrete   Samurai Cup Wheel Samurai is used for a chip free finish  ..

Single Row Diamond Cup Grinding Wheel

£32.00
Diamond cup wheels are highly abrasive resistant and good for quick smooth and free grinding. Suitable for grinding and polishing: Marble Granite Natural & Artificial Surfaces Concrete Single Row Cup Wheel Use the single row for fast removal rates  ..

Swirl Cup Diamond Cup Grinding Wheel

£38.00
Diamond cup wheels are highly abrasive resistant and good for quick smooth and free grinding. Suitable for grinding and polishing: Artificial Surfaces Concrete Hard Epoxy Resins  Swirl Cup Wheel Segmented grinding wheel for concrete, cement and hard material such as epoxy resin  ..

TDP Blind Drills

£28.88
A solid drill with a V cut for the water supply for drilling granite...

TDP Brazed Dry Cut Core Drills 107mm

£76.23
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive. 107mm OD X 150mm Length..

TDP Brazed Dry Cut Core Drills 117mm

£88.94
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive.   117mm OD X 150mm Length..

TDP Dry Cut Laser Welded Core Drils 107mm

£55.00
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive. 107mm OD X 150mm Length  ..

TDP Dry Cut Laser Welded Core Drils 117mm

£58.00
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive. 117mm OD X 150mm Length..

TDP Dry Cut Laser Welded Core Drils 127mm

£60.00
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive. 127mm OD X 150mm Length  ..

TDP Dry Cut Laser Welded Core Drils 152mm

£63.00
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive. 152mm OD X 150mm Length..

TDP Dry Cut Laser Welded Core Drils 22mm

£34.00
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive. 22mm OD X 300mm Length..

TDP Dry Cut Laser Welded Core Drils 28mm

£34.00
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive. 28mm OD X 300mm Length..

TDP Dry Cut Laser Welded Core Drils 32mm

£34.00
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive. 32mm OD X 150mm Length..

TDP Dry Cut Laser Welded Core Drils 48mm

£36.00
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive. 48mm OD X 150mm Length..

TDP Dry Cut Laser Welded Core Drils 52mm

£38.00
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive. 52mm OD X 150mm Length  ..

TDP Dry Cut Laser Welded Core Drils 65mm

£45.00
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive. 65mm OD X 150mm Length  ..

TDP Dry Cut Laser Welded Core Drils 78mm

£47.00
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive. 78mm OD X 150mm Length  ..

TDP Dry Cut Laser Welded Core Drils 91mm

£50.00
For use on medium to soft Applications: * Concrete Blocks * Soft To Medium Bricks Please advise slotted or unslotted drill ½ BSP female drive or male hex drive. 91mm OD X 150mm Length..

TDP Wet Cut Core Drills 107mm

£86.63
Professional quality brazed wet cut core drills for various applications.Produced to give faster cutting rates with tool longevity.Larger diameter and different cutting lengths on request...

TDP Wet Cut Core Drills 52mm

£57.75
Professional quality brazed wet cut core drills for various applications.Produced to give faster cutting rates with tool longevity.Larger diameter and different cutting lengths on request...

TDP Wet Cut Core Drills 65mm

£63.53
Professional quality brazed wet cut core drills for various applications.Produced to give faster cutting rates with tool longevity.Larger diameter and different cutting lengths on request...

TDP Wet Cut Core Drills 78mm

£69.30
Professional quality brazed wet cut core drills for various applications.Produced to give faster cutting rates with tool longevity.Larger diameter and different cutting lengths on request...

TDP Wet Cut Core Drills 90mm

£75.08
Professional quality brazed wet cut core drills for various applications.Produced to give faster cutting rates with tool longevity.Larger diameter and different cutting lengths on request...

THC Shoes

£28.88
Product Code Grit Size Application CA1 16/18 Grit A standard segment for floor grinding, removal of carpet adhesive, rain damaged surfaces & newly cast floors. CA2 60/80 Grit Used as stage 2 aft..

Turbo Diamond Cup Grinding Wheel

£47.00
Diamond cup wheels are highly abrasive resistant and good for quick smooth and free grinding. Suitable for grinding and polishing: Marble Granite * Natural & Artificial Surfaces Concrete  Turbo Cup Wheel For fast stock removal    ..

Two Sided Flush Cut Vanity Blade Vacuum Brazed 125mm Diam

£39.00
This new product out-performs any electroplated product and lasts double the lifetime. Applications:For dry cutting straight, curves and apertures in MARBLE and COMPOSITE materials. Marble Terrazzo General Stonework Building Products General Purpose Ceramics. Can be used on cutting and grinding applications Includes flush cut flange M14 fitting..

Vacuum Braised Diamond Cup Grinding Wheel

£52.00
Diamond cup wheels are highly abrasive resistant and good for quick smooth and free grinding. Suitable for grinding and polishing: Marble Granite * Natural & Artificial Surfaces Concrete  Vacuum Braised Wheel This product will even grind some steel applications    ..

Zenesis Laser Welded Ringsaw Blade

£85.00
The Zenesis Diamond Arrangement Technology System gives us the ability to precisely control strategic placement of every diamond for maximum performance. It is the biggest advance in the diamond blade industry since laser welding. The perfectly aligned diamonds are set to control wear and make the blade cut faster, without sacrificing one for the other. Most people have learned that better quality..

Flush Cut Blade - P15

£39.00
P15 Flush CutP15 Flush Cut Blade with flangeSIZES AVAILABLE125mm Diam with M14 fitting230mm Diam with M14 fittingAPPLICATIONSMedium to Hard materialsUse wet or dry..

Flush Cut Blade P10

£39.00
P10 FLUSH CUT BLADE WITH FLANGEAPPLICATIONGraniteSIZES AVAILABLE125mm Diam - M14 Fitting230mm Diam - M14 FittingUSE WET OR DRY..

Flush Cut Blade P25

£39.00
P25 FLUSH CUT BLADE COMPLETE WITH FLANGEAPPLICATIONSSoft to Medium MaterialsUse Wet Or DrySIZES AVAILABLE125mm Diam - M14 Fitting230mm Diam - M14 FittingPRICES INCLUDE FLANGE..